gtk-scanner
GTK+-based ESSID scanner. 802.11 network tools - allow for detection of networks and services initially using wireless extensions for linux (openbsd porting simple?) and raw 802.11 frames. initial support is for the wavelan/orinoco card and plan support for aironet cards.
Read the Article
|
aircrack
This lightweight remote administration tool for unix systems features remote shell execution with full tty/pty support, file transfers and strong 128-bit AES encryption.
Read the Article
|
AirFart
AirFart is a wireless tool created to detect wireless devices, calculate their signal strengths, and present them to the user in an easy-to-understand fashion. It is written in C/C++ with a GTK front end. Airfart supports all wireless network cards supported by the linux-wlan-ng Prism2 driver that provide hardware signal strength information in the "raw signal" format (ssi_type 3). Airfart implements a modular n-tier architecture with the data collection at the bottom tier and a graphical user interface at the top.
Read the Article
|
AirJack
AirJack is a device driver (or suit of device drivers) for 802.11(a/b/g) raw frame injection and reception. It is meant as a development tool for all manors of 802.11 applications that need to access the raw protocol.
Read the Article
|
Airsnarf
Airsnarf is a simple rogue wireless access point setup utility designed to demonstrate how a rogue AP can steal usernames and passwords from public wireless hotspots. Airsnarf was developed and released to demonstrate an inherent vulnerability of public 802.11b hotspots--snarfing usernames and passwords by confusing users with DNS and HTTP redirects from a competing AP.
Read the Article
|
AirSnort
AirSnort is a wireless LAN (WLAN) tool which recovers encryption keys. AirSnort operates by passively monitoring transmissions, computing the encryption key when enough packets have been gathered.
Read the Article
|
AirTraf
AirTraf is a 100% passive packet sniffing tool for the wireless 802.11b networks. It captures and tracks all wireless activity in the coverage area, decodes packets, and maintains acquired information associated by access points, as well as detected individual wireless nodes. It dynamically detects any access points in the area, finds association between wireless clients and access points, and builds information table for each packet that is transmitted via the air. AirTraf is able to maintain packet count, byte information, related bandwidth, as well as signal strength of nodes.
Read the Article
|
anwrap
anwrap is a wrapper for ancontrol that serves as a dictionary attack tool against LEAP enabled Cisco Wireless Networks. It traverses a user list and password list attempting authentication and logging the results to a file.
Read the Article
|
AP Hopper
AP Hopper is a program that automatically hops between access points of different wireless networks. It checks for DHCP and Internet Access on all the networks found. It logs successful and unsuccessful attempts.
Read the Article
|
APRadar
APRadar is a Linux/GTK+ based graphical netstumbler and wireless profile manager. This project makes use of the version 14 wireless extensions in linux 2.4.20 and 2.6 to provide access point scanning capabilities for most models of wireless cards. It is meant to replace the manual process of running iwconfig and dhclient. It makes reconfiguring for different APs quick and easy.
Read the Article
|
